Lee Precision Spline Drive Breech Lock Bushing (4 pack)
Spline Drive bushings are the evolution of the classic Lee Breech Lock bushing: they integrate a split locking collar into the body that tightens directly onto the die, eliminating the separate lock ring. The outer grooved surface provides a secure grip and allows the bushing to be screwed into and out of the press quickly and precisely. The four-piece pack allows you to dedicate a bushing to each die in a complete set.
Operation is simple: screw the die into the bushing, adjust it on the press, and slightly tighten the collar screw with a 3/32" hex key; the split collar locks the die like a vise. Loosening the screw releases the die without losing the bushing's calibration. The bushings are anodized and colored, so you can assign a color to each die and recognize it at a glance: a concrete advantage when working with multiple calibers, as reloading dies look very similar to each other.
Main features
Breech Lock bushing with integrated locking collar
Spline Drive grooved surface for a secure grip
Anodized and colored body for die identification
Tightens with a 3/32" hex key
Pack of 4 bushings
Recommended use
Suitable for Lee presses with the Breech Lock system and for Auto Breech Lock Pro and Pro 4000 progressive presses, where it allows you to prepare pre-calibrated dies in advance. Eliminates the need for a separate lock ring. The short 3/32" hex key (code 91634) is sold separately.