Wheeler Engineering 89 Piece Professional Gunsmithing Screwdriver Set
The 89-piece set is the complete professional set from Wheeler Engineering. The sizes of the flat blades were not chosen arbitrarily: they are derived from measurements of screws from over one hundred modern and antique firearms, which is why the set also covers the non-standard slots encountered on vintage guns.
The flat blades are hollow-ground, with a concave profile that allows the bit to reach the bottom of the slot and rest against the entire height of the sidewalls: the opposite of a wedge-shaped blade, which tends to cam out and damage the screw head. The thinnest sizes are included in duplicate, as these are the ones subject to the most stress. In addition to the flat blades, the set includes hex, Phillips, and Torx bits, as well as a series of special bits designed for specific firearm equipment and components. The two magnetized handles allow you to keep two bits ready and alternate between them without having to swap them out.
Main features
89 pieces made of S2 tool steel
54 hollow-ground flat blades, with duplicate copies of the thinnest sizes
8 hex bits from 1/16" to 3/16"
4 Phillips bits #0, 1, 2, and 3
3 Torx bits T10, T15, and T20
15 special bits, including scope ring clamps, sight adjustment tools, punch pins, and bits dedicated to specific firearms
Extension and hex-to-square adapter
Two magnetized handles with non-slip overmolding
Sizes derived from measurements of screws from over 100 modern and antique firearms
Recommended use
For the workshop and gunsmith's bench, for use on screws of modern and vintage firearms, including screw heads with non-standard slots.
Package contents
Two magnetized handles
54 hollow-ground flat blades, 8 hex, 4 Phillips, 3 Torx, and 15 special bits