Wheeler Engineering Scope Ring Alignment and Lapping Kit 1"
The 1" Scope Ring Alignment and Lapping Kit is Wheeler Engineering's solution to the problem of misaligned rings. Scope rings are rarely perfectly coaxial: if a scope tube is tightened into misaligned rings, it suffers permanent flex, which results in adjustment issues and, in the worst cases, damage to the riflescope.
The two alignment bars are mounted in the rings in place of the scope tube: the conical points facing each other make any vertical or horizontal misalignment visible to the eye, allowing it to be corrected before resting the scope. The lapping bar, held by the handle and used with the 220-grit abrasive compound, removes material from the inside of the rings until they are on the same axis and the tube rests on the entire surface rather than just two points. The result is a wider grip, less stress on the riflescope, and fewer marks on the tube.
Main features
For 1" rings
Two 1" alignment bars
1" lapping bar with handle
220-grit abrasive compound
Reveals vertical and horizontal misalignment before mounting the scope
Recommended use
For mounting riflescopes with a 1" tube. Wheeler recommends making alignment and lapping of new rings a standard practice whenever installing a scope on a quality firearm.