UTG Accu-Sync 1" cantilever mount, 50 mm offset, medium profile, black

UTG Accu-Sync 1" cantilever mount, 50 mm offset, medium profile, black

The Accu-Sync AIR11850 is a one-piece cantilever mount for 1-inch tube optics, featuring a 50 mm forward offset, medium profile, and black finish. The increased offset is used when the optic must be moved significantly forward to achieve the correct eye relief.

The body is machined from 6061-T6 aluminum with a matte anodized finish and weight-reduced by relief cuts that lower mass without affecting load-bearing sections; the edges are radiused to prevent snagging on equipment. The rings are precision-machined to ensure a precise internal diameter and correct tube alignment, a condition that avoids deformation and pressure points on the optic. Zero retention is ensured by self-locking Torx screws and integral square-profile recoil lugs, with the manufacturer rating the mount for calibers up to .338 Lapua Magnum.

Main features

• 1" (25.4 mm) ring diameter
• Medium profile, 18 mm saddle height
• 50 mm forward offset
• 100 mm (3.94") base, occupies 11 Picatinny slots
• 6061-T6 aluminum with matte black anodized finish
• Maximum allowable objective lens diameter 60 mm (2.36")
• Rated for use up to .338 Lapua Magnum
• Weight 143 g (5.05 oz)
• Tightening torque: 25 in-lbs for top screws and 35 in-lbs for the side plate (Torx T20)

Recommended use

Suitable for rifles with a Picatinny rail where the optic needs to be moved forward: the offset provides the correct eye relief when the optic would otherwise be mounted too far back, making it the standard solution for AR-15 rifles with long-tube optics.

Package contents

• Cantilever mount
• 1 #8-32 cylinder head Torx T20 screw
• 1 #8-32 flat head Torx T20 screw
• 1 Torx T20 wrench

Manufacturer code: AIR11850