Leupold STD 1″ Rings Medium Gloss Black

Leupold STD 1″ Medium Gloss Black Rings

Leupold STD 1″ medium-height rings are a pair of steel rings designed for one- or two-piece Leupold Standard bases, the most popular mounting system in the Leupold catalog.

The front ring locks into a dovetail and rotates into the base, while the rear ring is adjusted laterally using windage screws: initial alignment is therefore achieved during mounting, leaving the scope's elevation travel intact for ballistic compensation. The height is 0.77″, approximately 19.6 mm from the base plane to the center of the ring; the top screws are tightened to 28 in-lb and the windage screws to 45 in-lb. Steel, gloss black finish; Leupold recommends the STD system for calibers up to .300 Win. Mag.

Main features

• Series: Leupold STD
• Tube diameter: 1″
• Height class: medium
• Height from base plane to center of ring: 0.77″, approximately 19.6 mm
• Material: steel
• Finish: gloss black
• Weight: 2.5 oz, approximately 71 g
• Mounting: Leupold STD dovetail, for Standard bases
• Recommended torque settings: ring top screws 28 in-lb, windage screws 45 in-lb
• Configuration: pair of rings

Recommended use

They must be paired with one- or two-piece Leupold STD bases corresponding to the firearm model. They are not compatible with Weaver or Picatinny rails, nor with Dual Dovetail bases, which have a different geometry: for those, cross-slot rings (PRW2, QRW2, Mark 4) or DD rings are required, respectively.

Manufacturer code: 49900