Skip to product information
1 of 1

Leupold STD two-piece bases for small-ring Mauser 96 and 38, matte black

Leupold STD two-piece bases for small-ring Mauser 96 and 38, matte black

Regular price €40,00 EUR
Regular price Sale price €40,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEU.51263

In stock

Quantity
  • Manufacturer warranty: lifetime – Leupold · terms
  • Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
  • 14-day right of withdrawal for consumers
  • Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
4.9/5 on Trustpilot · over 1,000 reviews

Leupold STD two-piece bases for small-ring Mauser 96 and 38, matte black

Leupold STD two-piece bases serve as the interface between the small-ring Mauser 96 and 38 receiver and the rings that hold the riflescope: they define the position, height, and alignment of the optic, upon which zero retention under recoil and correct eye relief depend. The two-piece solution leaves the ejection port clear and reduces weight and bulk compared to a one-piece rail. The matte black finish reduces glare and is consistent with matte blued or treated firearms.

On the Standard system, the front ring rests on a dovetail mount that rotates into position, while the rear ring is secured by two opposing windage screws. During bore-sighting, the windage screws allow for lateral centering of the optic without consuming the scope's internal adjustment range, which remains available for fine-tuning; for larger vertical corrections, Leupold suggests the use of shims, leaving the elevation turret free for ballistic compensation. The construction is steel, and the manufacturer recommends the STD system for standard calibers up to .300 Win. Mag. The specified torque settings are 22 in-lb for the base-to-receiver screws and 45 in-lb for the windage screws.

Main features

  • Leupold STD mounting system
  • Configuration: two-piece
  • Material: steel
  • Finish: matte black
  • Windage adjustment on the rear base via opposing screws
  • Leupold torque settings: 22 in-lb base-to-receiver screws, 45 in-lb windage screws
  • Rings required: Leupold STD rings
  • Leupold item code: 51263

Recommended use

Leupold indicates this item code for the following firearms:

  • Small Ring Mauser 96 and Mauser 38

The mounting is completed with Leupold STD rings, available for 1-inch and 30 mm tubes in low, medium, high, and super high heights: the height should be chosen based on the scope's objective lens diameter and barrel profile.

Package contents

  • 2 mounting bases, front and rear
  • Receiver mounting screws

Rings and riflescope are not included: the system requires Leupold STD rings, to be ordered separately in the correct diameter and height.

Manufacturer code: 51263

View full details

Questions about Leupold STD two-piece bases for small-ring Mauser 96 and 38, matte black?