Leupold STD RVR two-piece bases for Browning A-Bolt and Steyr SBS Pro Hunter, gloss black
Leupold STD RVR two-piece bases for Browning A-Bolt and Steyr SBS Pro Hunter, gloss black
SKU:LEU.50029
In stock
Couldn't load pickup availability
- Manufacturer warranty: lifetime – Leupold · terms
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Leupold STD RVR two-piece bases for Browning A-Bolt and Steyr SBS Pro Hunter, gloss black
The Leupold STD RVR two-piece bases are the interface between the Browning A-Bolt and Steyr SBS Pro Hunter receiver and the rings that hold the scope: they define the position, height, and alignment of the optic, upon which zero retention under recoil and correct eye relief depend. The two-piece solution leaves the ejection port clear and reduces weight and bulk compared to a one-piece rail. The gloss black finish matches the polished bluing of classic-style firearms.
On the Standard system, the front ring rests on a dovetail mount that rotates into place, while the rear ring is held by two opposing windage screws. During bore sighting, the windage screws allow for lateral centering of the optic without consuming the scope's internal adjustment range, which remains available for fine-tuning; for larger vertical corrections, Leupold provides for the use of shims, leaving the elevation turret free for ballistic compensation. The construction is steel, and the manufacturer specifies the STD system for standard calibers up to .300 Win. Mag. The stated torque settings are 22 in-lb for the base-to-receiver screws and 45 in-lb for the windage screws.
Main features
- Leupold STD mounting system
- Configuration: two-piece
- Reversible (RVR) rear base: can be oriented in two positions to vary the spacing between the rings
- Material: steel
- Finish: gloss black
- Windage adjustment on the rear base via opposing screws
- Leupold torque settings: 22 in-lb for base/receiver screws, 45 in-lb for windage screws
- Rings required: Leupold STD rings
- Leupold part number: 50029
Recommended use
Leupold specifies this part number for the following firearms:
- Browning A-Bolt long action and short action
- Browning Micro Medallion
- Steyr SBS Pro Hunter and Forester
The assembly is completed with Leupold STD rings, available for 1-inch and 30mm tubes in low, medium, high, and super high heights: the height should be chosen based on the scope's objective lens diameter and barrel clearance.
Package contents
- 2 mounting bases, front and rear
- Receiver mounting screws
Rings and scope are not included: the system requires Leupold STD rings, to be ordered separately in the correct diameter and height.
Manufacturer code: 50029
Share
