Leupold STD one-piece base for pre-1996 Browning BLR gloss black
Leupold STD one-piece base for pre-1996 Browning BLR gloss black
SKU:LEU.49986
In stock
Couldn't load pickup availability
- Manufacturer warranty: lifetime – Leupold · terms
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Leupold STD one-piece base for pre-1996 Browning BLR, gloss black
The Leupold STD one-piece base is the interface between the pre-1996 Browning BLR receiver and the rings that hold the riflescope; it defines the position, height, and alignment of the optic, which determines zero retention under recoil and correct eye relief. It is a dedicated mount, machined to the weapon's specifications, which attaches to the factory-drilled holes without any modifications. The gloss black finish matches the polished bluing of classic-style firearms.
In the Standard system, the front ring rests on a dovetail mount that rotates into place, while the rear ring is held by two opposing windage screws. During bore sighting, the windage screws allow for lateral centering of the optic without consuming the scope's internal adjustment range, which remains available for fine-tuning; for larger vertical corrections, Leupold recommends the use of shims, leaving the elevation turret free for ballistic compensation. The construction is steel, and the manufacturer specifies the STD system for standard calibers up to .300 Win. Mag. The stated torque settings are 22 in-lb for the base-to-receiver screws and 45 in-lb for the windage screws.
Main features
- Leupold STD mounting system
- Configuration: one-piece
- Material: steel
- Finish: gloss black
- Windage adjustment on the rear base via opposing screws
- Leupold torque settings: 22 in-lb for base/receiver screws, 45 in-lb for windage screws
- Required rings: Leupold STD rings
- Leupold item code: 49986
Recommended use
Leupold specifies this item code for the following firearms:
- Browning BLR manufactured before 1996
The mounting is completed with Leupold STD rings, available for 1-inch and 30 mm tubes in low, medium, high, and super high heights: the height should be chosen based on the scope's objective lens diameter and barrel clearance.
Package contents
- 1 mounting base
- Receiver mounting screws
Rings and riflescope are not included: the system requires Leupold STD rings, to be ordered separately in the correct diameter and height.
Manufacturer code: 49986
Share
