Leupold STD 1″ Rings High Matte Black
Leupold STD 1″ Rings High Matte Black
SKU:LEU.49904
In stock
Couldn't load pickup availability
- Manufacturer warranty: lifetime – Leupold · terms
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Leupold STD 1″ High Matte Black Rings
The Leupold STD 1″ rings in high height are a pair of steel rings designed for one-piece or two-piece Leupold Standard bases, the most popular mounting system in the Leupold catalog.
The front ring locks into the base with a dovetail and rotates into position, while the rear ring is adjusted laterally using the windage screws: initial alignment is thus achieved during mounting, leaving the scope's elevation travel intact for ballistic compensation. The height is 0.9″, approximately 22.9 mm from the base surface to the center of the ring; the top screws should be tightened to 28 in-lb and the windage screws to 45 in-lb. Steel, matte black finish; Leupold recommends the STD system for calibers up to .300 Win. Mag.
Main features
- Series: Leupold STD
- Tube diameter: 1″
- Height class: high
- Height from base surface to center of ring: 0.9″, approximately 22.9 mm
- Material: steel
- Finish: matte black
- Weight: 3 oz, approximately 85 g
- Attachment: Leupold STD dovetail, for Standard bases
- Specified torque: top ring screws 28 in-lb, windage screws 45 in-lb
- Configuration: pair of rings
Recommended use
They must be paired with one-piece or two-piece Leupold STD bases corresponding to the firearm model. They are not compatible with Weaver or Picatinny rails or Dual Dovetail bases, which have a different geometry: for those, cross-slot (PRW2, QRW2, Mark 4) or DD rings are required, respectively.
Manufacturer code: 49904
Share
