Leupold STD 1″ Medium Extension Rings Gloss Black
Leupold STD 1″ Medium Extension Rings Gloss Black
SKU:LEU.49909
In stock
Couldn't load pickup availability
- Manufacturer warranty: lifetime – Leupold · terms
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Leupold STD 1″ Medium Extension Rings, Gloss Black
The Leupold STD 1″ medium-height extension rings are a pair of steel rings designed for one- or two-piece Leupold Standard bases, the most popular mounting system in the Leupold catalog.
The front ring locks into a dovetail and rotates into the base seat, while the rear ring is adjusted laterally using the windage screws; initial alignment is therefore achieved during mounting, leaving the scope's elevation travel intact for ballistic compensation. The extension version shifts the ring seat forward: it is used to recover eye relief when the scope is short relative to the action, or to provide the necessary clearance above the ejection port. The height is 0.77″, approximately 19.6 mm from the base surface to the center of the ring; the top screws should be tightened to 28 in-lb and the windage screws to 45 in-lb. Steel, gloss black finish; Leupold specifies the STD system for calibers up to .300 Win. Mag.
Main features
- Series: Leupold STD
- Tube diameter: 1″
- Height class: medium, with extension
- Height from base surface to ring center: 0.77″, approx. 19.6 mm
- Material: steel
- Finish: gloss black
- Weight: 2.8 oz, approx. 79 g
- Mount: Leupold STD dovetail, for Standard bases
- Specified torque: top ring screws 28 in-lb, windage screws 45 in-lb
- Configuration: pair of rings
Recommended use
They must be paired with one- or two-piece Leupold STD bases corresponding to the firearm model. They are not compatible with Weaver or Picatinny rails or Dual Dovetail bases, which have a different geometry: for those, cross-slot rings (PRW2, QRW2, Mark 4) or DD rings are required, respectively.
Manufacturer code: 49909
Share
