Leupold STD 1″ Low Rings with Extension Matte Black
Leupold STD 1″ Low Rings with Extension Matte Black
SKU:LEU.49910
In stock
Couldn't load pickup availability
- Manufacturer warranty: lifetime – Leupold · terms
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Leupold STD 1″ Low Extension Rings, Matte Black
The Leupold STD 1″ low-height extension rings are a pair of steel rings designed for one-piece or two-piece Leupold Standard bases, the most popular mounting system in the Leupold catalog.
The front ring engages with a dovetail and rotates into the base, while the rear ring is adjusted laterally using the windage screws: initial alignment is thus achieved during mounting, leaving the scope's elevation travel intact for ballistic compensation. The extension version shifts the ring position forward: it is used to gain eye relief when the scope is short relative to the action, or to provide clearance above the ejection port. The height is 0.65″, approximately 16.5 mm from the base plane to the center of the ring; the top screws should be torqued to 28 in-lb and the windage screws to 45 in-lb. Steel, matte black finish; Leupold recommends the STD system for calibers up to .300 Win. Mag.
Main features
- Series: Leupold STD
- Tube diameter: 1″
- Height class: low, with extension
- Height from base plane to ring center: 0.65″, approximately 16.5 mm
- Material: steel
- Finish: matte black
- Weight: 2.8 oz, approximately 79 g
- Mount: Leupold STD dovetail, for Standard bases
- Stated torque settings: ring top screws 28 in-lb, windage screws 45 in-lb
- Configuration: pair of rings
Recommended use
They must be paired with one-piece or two-piece Leupold STD bases corresponding to the firearm model. They are not compatible with Weaver or Picatinny rails, nor with Dual Dovetail bases, which have a different geometry: for those, cross-slot rings (PRW2, QRW2, Mark 4) or DD rings are required, respectively.
Manufacturer code: 49910
Share
