Lee Precision Challenger Kit 90030 with Challenger III Press
The Challenger Kit is the Lee single-stage reloading kit built around the Challenger III press and is the configuration recommended by the manufacturer for those primarily reloading rifle ammunition. Everything needed for the complete cycle is included in a single package: press, powder measurement, weight check, and case preparation.
The Challenger III features an O-frame steel design with steel linkages, a 4-inch opening, and an adjustable-length lever; the Breech Lock system allows for mounting and dismounting pre-set dies with a quarter-turn, and spent primers are discharged through the ram into a collection tube. The main difference compared to the 50th Anniversary Challenger Kit is the priming system: this kit includes the Auto Bench Prime, a bench-mounted priming tool provided with three of the most commonly used shell holders (numbers 2, 4, and 19), which allows for off-press priming with greater sensitivity.
Main features
Challenger III single-stage press with steel O-frame
4-inch opening, steel linkages, adjustable lever
Breech Lock system for quick die changes
Spent primer ejection through the ram
Off-press priming with Auto Bench Prime
Configuration oriented toward rifle reloading
Recommended use
Complete kit for metallic reloading on a single-stage press, with a particular focus on rifle calibers. Caliber-specific dies and shell holders are not included; for the Value Trim case trimmer, the caliber-specific Quick Trim Die is required and must be purchased separately.
Package contents
Challenger III press with one Smart Lock bushing
Perfect Powder Measure
Lee Safety Scale
Powder funnel
Value Trim case trimmer
Cutter and Lock Stud
Case mouth chamfer tool
Primer pocket cleaning tools
Case sizing lubricant
Auto Bench Prime with shell holders #2, #4, and #19