Lee Precision shell plate #19S for Load Master press (9 Luger, 40 S&W, 38 Super)

Lee Precision #19S shell plate for Load Master press

The #19S shell plate is the shell holder plate for the Lee Load-Master progressive press. It holds the cartridge case bases and guides them through the five stations of the press, from decapping and resizing to crimping, rotating 72° with every full stroke of the lever. It is chosen based on the base diameter, i.e., the group of calibers you intend to reload.

Each Load-Master shell plate covers a family of cartridges that share the same base: as long as you stay within the group, it does not need to be replaced, while switching to a base of a different diameter requires the corresponding plate. If the new caliber uses different size primers, the appropriate priming group (small or large) must also be provided. The plate works together with the press's indexer, flipper, and ejector; Lee Precision moved the Load-Master platform to legacy status in April 2022, and the shell plates remain available as spare parts.

Main features

• #19S shell plate for Lee Load-Master progressive press
• Calibers provided by Lee Precision: 9mm Luger, 9mm Largo, 40 S&W, 38 Super, and 7.62x25 Tokarev
• Mounts onto the Load-Master carrier and rotates 72° with every lever stroke
• Services the five stations of the press in a single complete rotation
• Individual spare part, sold separately from the priming group

Recommended use

Intended exclusively for the Lee Load-Master progressive press (produced 1992-2022). It is not interchangeable with Pro 1000 shell plates or universal shell holders for single-stage presses, which have different geometries and mounts. For caliber changes, check the press manual for the correspondence between the shell plate number and the cartridge.

Package contents

One #19S shell plate. The priming group, case feeder, dies, and press carrier are not included.

Manufacturer code: 90920