Lee Precision small primer pin for Load-Master LM3250

Lee Precision small primer pin for Load-Master LM3250

The LM3250 primer pin is the small size priming pin for the primer feed assembly of Lee Load-Master progressive presses. It is the component that rises through the shell plate to push the primer into the cartridge primer pocket: if the tip is worn, bent, or chipped, the primer will be seated crookedly or fail to seat fully.

The Load-Master uses separate pins for small and large primers, so this part number should only be ordered for the small configuration: installing a pin of the wrong size will prevent proper priming. The pin works in conjunction with its LM3290 spring, of which the press requires two; when replacing the pin, it is advisable to check the condition of the springs as well, because the assembly will only return to proper operation if both elements are in good order.

Main features

• Small size primer pin
• Compatible press: Lee Load-Master
• To be used with the LM3290 primer pin spring
• Genuine Lee Precision spare part
• Manufacturer code: LM3250

Recommended use

Indicated for the maintenance of the small primer feed on Lee Load-Master presses. Verify the size of the removed pin before installation and check alignment with the primer pocket while empty before resuming production.

Package contents

• 1 small primer pin

Springs, troughs, or other components of the priming assembly are not included.

Manufacturer code: LM3250