Lee Precision 4-die Deluxe Carbide set 40 S&W / 10mm Auto
Lee Precision 4-die Deluxe Carbide set 40 S&W / 10mm Auto
SKU:LEE.90965
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Deluxe Carbide 4-Die Set 40 S&W / 10mm Auto
The Lee Precision Deluxe Carbide 4-Die Set is the most complete die set for reloading the 40 S&W and 10mm Auto, two calibers that share the same bullet diameter and are serviced by the same set. It adds the Carbide Factory Crimp Die to the three dies in the standard set, which separates the crimping from the bullet seating: a configuration designed for those who produce ammunition in quantity for practical shooting and process range brass.
The full-length resizing die features a tungsten carbide ring and works without lubricant; the Powder Through Expanding Die flares the case mouth and acts as a funnel for powder, allowing the powder measure to be mounted on top of the die, thus enabling the set to be used in a progressive cycle; the seating die inserts the bullet. The fourth die, the Carbide Factory Crimp Die, applies an independent taper crimp and performs a final resizing of the entire assembled cartridge thanks to its carbide ring: a useful step for the 40 S&W, whose cases fired in generous chambers tend to present the characteristic bulge at the base.
Main features
- Four-die set valid for 40 S&W and 10mm Auto
- Full-length resizing die with carbide insert and integrated decapping pin
- Resizing without lubricant thanks to the carbide ring
- Powder Through Expanding Die for case mouth flaring and powder dispensing
- Dedicated seating die with fine adjustment for overall length
- Carbide Factory Crimp Die with separate crimping and final resizing of the complete cartridge
- Standard 7/8"-14 thread
Recommended use
The same set allows you to assemble both 40 S&W and 10mm Auto by adjusting the dies for the length of the case being processed. It is the configuration recommended by Lee for those who process mixed or range brass and the natural choice for use on four-station progressive presses. It mounts on any reloading press with a standard 7/8"-14 threaded connection, the format adopted by Lee single-stage, turret, and progressive presses, as well as most presses from other manufacturers.
Package contents
- Carbide full-length resizing die
- Powder Through Expanding Die
- Bullet seating die
- Carbide Factory Crimp Die
- Universal shell holder
- Powder dipper
- Instructions with reloading data table
The press, powder measure, and cartridge components (cases, primers, powder, and bullets) are not included.
Manufacturer code: 90965
Share
