Lee Precision Collet Neck Sizing Die 6.5x55 Swedish Mauser
Lee Precision Collet Neck Sizing Die 6.5x55 Swedish Mauser
SKU:LEE.91009
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Collet Neck Sizing Die 6.5x55 Swedish Mauser
The Lee Precision Collet Neck Sizing Die in 6.5x55 Swedish Mauser is a single die that resizes only the neck of the case, leaving the body and shoulder untouched. It is the go-to die for those reloading cases already fired in their own rifle who are seeking maximum dimensional consistency with minimal work on the brass.
The operation is based on a steel collet that squeezes the case neck against a precision mandrel: the final measurement is determined by the mandrel rather than the die body, resulting in better alignment and reduced runout compared to resizing with a pull-through expander. Since the case is not compressed over its entire length, no lubricant is required and the brass undergoes much less deformation, extending its service life. Lee recommends its use on cases fired in one's own chamber; for brass of mixed origin, a full-length resizing die is still necessary.
Main features
- Single die for neck-only resizing, 6.5x55 Swedish Mauser caliber
- Steel collet and precision mandrel
- No case lubricant required
- Reduced runout and longer case life
- 7/8"-14 threaded body, compatible with standard reloading presses
Recommended use
It screws into Lee and other brand presses with 7/8"-14 threading. It is intended for cases fired in your own firearm. For quick changes on Lee presses with the Breech Lock system, the appropriate Spline Drive bushings are required (not included). Lee offers a decapping mandrel for undersized primer holes and a .002" undersize mandrel separately.
Package contents
The package contains only the Collet Neck Sizing Die with locking ring and instructions. Shell holder, bullet seating die, full-length resizing die, and the press are not included.
Manufacturer code: 91009
Share
