The Classic Turret combines the turret press concept with the construction of the Classic Cast: a rigid cast iron frame, all-steel linkages, and a lever with a wood grip. It is the turret press designed for those who reload both pistol and rifle ammunition and are looking for the rigidity of a heavy single-stage press with the convenience of dies that are always mounted.
The four-hole turret allows you to keep an entire set of dies calibrated and take the case through all stages without disassembling anything. The auto-indexing feature advances the turret with every stroke and can be disengaged, which also allows for loading longer cartridges just like a standard single-stage press. The cast iron frame supports the ram over more than 12 square inches of surface area; the ram is bored through its entire length to discharge spent primers into a clear PVC tube. Priming is done on the press with the Lee Lever Primer System, with the Safety Prime available as an accessory.
Main features
Turret press with four die holes
Cast iron frame and steel linkages
Disengageable auto-indexing
Hollow ram with primer collection tube
Ram support surface greater than 12 square inches
Lever with wood grip
On-press priming with Lever Primer System
Recommended use
Suitable for reloading pistol and rifle calibers. With auto-indexing engaged, Lee specifies it can handle rifle cases over 3 inches; by disengaging it, you can load cartridges over 4 inches by advancing the turret by hand. Additional turrets, Safety Prime, and roller handle (92040) are separate accessories; dies and shell holders are not included.