Lee Precision Chamfer and Deburring Tool 90109
Lee Precision Chamfer and Deburring Tool 90109
SKU:LEE.90109
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Chamfer Tool 90109
The Chamfer Tool is the Lee Precision manual tool used to finish the case mouth after trimming. It chamfers and deburs the neck both inside and outside: the trimmer cut leaves a burr that hinders bullet seating and can scratch the surface during the process.
The two ends handle the two operations. The internal cone slightly opens the mouth, allowing the bullet to enter centered without scraping the neck; the external cone removes the burr along the edge and uniformizes the wall thickness at the point of contact with the chamber. The capacity on the external side reaches cases up to .570 inches in diameter, so the tool covers the entire range of common calibers up to and including .50 BMG. The same tip also serves to remove crimping from the primer pockets of military cases, an operation necessary for re-priming.
Main features
- Chamfers and deburs the case neck inside and out
- Removes crimping from primer pockets
- External capacity up to .570 inch diameter cases
- Usable up to .50 BMG caliber
- Compact manual tool with dual-use design on a single body
Recommended use
To be used immediately after case trimming, with a few light rotations per side: only the burr should be removed, without thinning the neck. It is the natural complement to Lee trimming systems based on the Case Length Gage and Cutter.
Manufacturer code: 90109
Share
