Lee Precision Case Length Gage with shellholder 7mm-08 Remington 90167
Lee Precision Case Length Gage with shellholder 7mm-08 Remington 90167
SKU:LEE.90167
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 7mm-08 Remington 90167
The Case Length Gage and Shellholder is the assembly consisting of the length gauge and the dedicated shell holder used by Lee Precision to trim cases to size and square their mouth. This unit works on the 7mm-08 Remington: the trim length is determined by the gauge's geometry, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.
The case is held by the shell holder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The assembly acts as a go/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the mouth from bumping against the cartridge chamber and maintains a constant crimp. The mouth is perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.
Main features
- Length gauge and shell holder dedicated to the 7mm-08 Remington
- Mechanical stop: length is repeatable across the entire batch of cases
- Lee tolerance +.000/-.015 inches
- Functions as a go/no-go gauge: if the case is not cut, it is already to size
- Squares the case mouth perpendicular to the axis
- Requires no adjustments or calibration
Recommended use
The gauge must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 7mm-08 Remington
- Dedicated shell holder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90167
Share
