Lee Precision Case Length Gage with shellholder 7.62x39 Russian 90133
Lee Precision Case Length Gage with shellholder 7.62x39 Russian 90133
SKU:LEE.90133
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 7.62x39 Russian 90133
The Case Length Gage and Shellholder is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit works for the 7.62x39 Russian: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go/no-go gage: if the case is not cut, it means it is already within limits. Lee declares a tolerance of +.000/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the mouth from bumping into the cartridge chamber and maintains consistent crimping. The mouth results in being perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires neither calibration nor maintenance.
Main features
- Length gage and shellholder dedicated to the 7.62x39 Russian
- Mechanical stop of the cut: length repeatable across the entire batch of cases
- Lee tolerance +.000/-.015 inches
- Works as a go/no-go gage: if the case is not cut, it is already to size
- Squares the case mouth perpendicularly to the axis
- Requires no adjustments or calibration
Recommended use
The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—one is sufficient for all cartridges with a bullet diameter smaller than .475 inches—and is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 7.62x39 Russian
- Dedicated shellholder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90133
Share
