Lee Precision Case Length Gage with shellholder 500 S&W Magnum 90019
Lee Precision Case Length Gage with shellholder 500 S&W Magnum 90019
SKU:LEE.90019
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 500 S&W Magnum 90019
The Case Length Gage and Shellholder is the assembly consisting of a length gage and a dedicated shellholder used by Lee Precision to trim cases to length and square the case mouth. This unit is designed for the 500 S&W Magnum: the trim length is determined by the geometry of the gage, meaning it does not depend on adjustments or readings by the operator and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go/no-go gauge: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000/-.015 inches for these units. On a rimmed case like the 500 S&W Magnum, uniform length is what makes the crimp consistent: cases of different lengths receive different closures, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the case axis. The system is entirely mechanical and requires no calibration or maintenance.
Main features
- Length gage and shellholder dedicated to the 500 S&W Magnum
- Mechanical stop: repeatable length for the entire batch of cases
- Lee tolerance +.000/-.015 inches
- Functions as a go/no-go gauge: if the case is not cut, it is already to size
- Squares the case mouth perpendicular to the axis
- Requires no adjustments or calibration
Recommended use
This gage requires the Large Cutter with Lock Stud 90401, sold separately: the Cutter and Lock Stud 90110 works for cartridges with a bullet diameter smaller than .475 inches, while the 500 S&W Magnum is among the cartridges with a bullet diameter of .475 inches or larger, for which Lee prescribes the large version. The tool can be used by hand or mounted on an electric drill. After trimming, it is recommended to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 500 S&W Magnum
- Dedicated shellholder
- Not included: Large Cutter with Lock Stud 90401
Manufacturer code: 90019
Share
