Skip to product information
1 of 1

Lee Precision Case Length Gage with shellholder 480 Ruger 90018

Lee Precision Case Length Gage with shellholder 480 Ruger 90018

Regular price €9,90 EUR
Regular price Sale price €9,90 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90018

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Case Length Gage and Shellholder 480 Ruger 90018

The Case Length Gage and Shellholder is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the 480 Ruger: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical for the entire batch of cases.

The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go/no-go gage: if the case is not cut, it means it is already within limits. Lee declares a tolerance of +.000/-.015 inches for these units. On a rimmed case like the 480 Ruger, uniform length is what makes the crimp consistent: cases of different lengths receive a different closure, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the case axis. The system is entirely mechanical and requires neither calibration nor maintenance.

Main features

  • Length gage and shellholder dedicated to the 480 Ruger
  • Mechanical stop: length repeatable across the entire batch of cases
  • Lee tolerance +.000/-.015 inches
  • Works as a go/no-go gage: if the case is not cut, it is already to size
  • Squares the case mouth perpendicularly to the axis
  • Requires no adjustments or calibration

Recommended use

This gage requires the Large Cutter with Lock Stud 90401, sold separately: the Cutter and Lock Stud 90110 works on cartridges with a bullet diameter of less than .475 inches, while the 480 Ruger is among the cartridges with a bullet diameter equal to or greater than .475 inches, for which Lee prescribes the large version. The tool is used by hand or mounted on an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.

Package contents

  • Case Length Gage 480 Ruger
  • Dedicated shellholder
  • Not included: Large Cutter with Lock Stud 90401

Manufacturer code: 90018

View full details

Questions about Lee Precision Case Length Gage with shellholder 480 Ruger 90018?