Lee Precision Case Length Gage with shellholder 460 S&W Magnum 90220
Lee Precision Case Length Gage with shellholder 460 S&W Magnum 90220
SKU:LEE.90220
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 460 S&W Magnum 90220
The Case Length Gage and Shellholder is the assembly consisting of a length gage and a dedicated shellholder used by Lee Precision to trim cases to size and square the case mouth. This unit works with the 460 S&W Magnum: the trim length is determined by the geometry of the gage, meaning it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000/-.015 inches for these units. On a rimmed case like the 460 S&W Magnum, uniform length is what ensures a consistent crimp: cases of different lengths receive different crimps, causing bullet retention to vary from shot to shot. The trimmed mouth remains perpendicular to the case axis. The system is entirely mechanical and requires no calibration or maintenance.
Main features
- Case length gage and shellholder dedicated to the 460 S&W Magnum
- Mechanical travel stop: repeatable length for the entire batch of cases
- Lee tolerance +.000/-.015 inches
- Works as a go/no-go gage: if the case is not cut, it is already to size
- Squares the case mouth perpendicular to the axis
- Requires no adjustments or calibration
Recommended use
The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth using the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 460 S&W Magnum
- Dedicated shellholder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90220
Share
