Skip to product information
1 of 1

Lee Precision Case Length Gage with shellholder 45 Colt 90163

Lee Precision Case Length Gage with shellholder 45 Colt 90163

Regular price €12,00 EUR
Regular price Sale price €12,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90163

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Case Length Gage and Shellholder 45 Colt 90163

The Case Length Gage and Shellholder is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit works on the 45 Colt: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.

The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000/-.015 inches for these units. On a rimmed case like the 45 Colt, a uniform length is what makes the crimp consistent: cases of different lengths receive a different closure, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the case axis. The system is entirely mechanical and requires no calibration or maintenance.

Main features

  • Length gage and shellholder dedicated to the 45 Colt
  • Mechanical travel stop: repeatable length across the entire batch of cases
  • Lee tolerance +.000/-.015 inches
  • Functions as a go/no-go gauge: if the case is not cut, it is already at the correct size
  • Squares the case mouth perpendicular to the axis
  • Requires no adjustments or calibration

Recommended use

The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.

Package contents

  • Case Length Gage 45 Colt
  • Dedicated shellholder
  • Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)

Manufacturer code: 90163

View full details

Questions about Lee Precision Case Length Gage with shellholder 45 Colt 90163?