Lee Precision Case Length Gage with shellholder 45 GAP 90224
Lee Precision Case Length Gage with shellholder 45 GAP 90224
SKU:LEE.90224
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 45 GAP 90224
The Case Length Gage and Shellholder is the assembly consisting of the length gauge and the dedicated shellholder used by Lee Precision to trim cases to size and square the case mouth. This unit works on the 45 GAP: the trim length is determined by the geometry of the gauge, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The assembly acts as a go/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance for these units of +.000/-.015 inches, reduced to +.000/-.010 inches for cartridges that headspace on the case mouth, such as the 45 GAP, where length directly affects headspace and the consistency of the operating cycle. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping phase uniform. The system is entirely mechanical and requires no calibration or maintenance.
Main features
- Case Length Gage and shellholder dedicated to the 45 GAP
- Mechanical travel stop: length repeatable across the entire batch of cases
- Lee tolerance of +.000/-.010 inches for cartridges that headspace on the mouth
- Works as a go/no-go gauge: if the case is not cut, it is already to size
- Squares the case mouth perpendicular to the axis
- Requires no adjustments or calibration
Recommended use
The gauge must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to deburr and chamfer the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 45 GAP
- Dedicated shellholder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90224
Share
