Skip to product information
1 of 1

Lee Precision Case Length Gage with shellholder 45 ACP 90162

Lee Precision Case Length Gage with shellholder 45 ACP 90162

Regular price €9,90 EUR
Regular price Sale price €9,90 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90162

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Case Length Gage and Shellholder 45 ACP 90162

The Case Length Gage and Shellholder is the assembly consisting of the length gage and dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit is designed for the 45 ACP: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.

The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go/no-go gauge: if the case is not cut, it means it is already within limits. Lee states a tolerance for these units of +.000/-.015 inches, reduced to +.000/-.010 inches for cartridges that headspace on the case mouth, such as the 45 ACP, where length directly affects headspace and cycling consistency. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping phase uniform. The system is entirely mechanical and requires no calibration or maintenance.

Main features

  • Length gage and shellholder dedicated to the 45 ACP
  • Mechanical stop: repeatable length for the entire batch of cases
  • Lee tolerance of +.000/-.010 inches for cartridges that headspace on the mouth
  • Functions as a go/no-go gauge: if the case is not cut, it is already to size
  • Squares the case mouth perpendicularly to the axis
  • Requires no adjustments or calibration

Recommended use

The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is recommended to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.

Package contents

  • Case Length Gage 45 ACP
  • Dedicated shellholder
  • Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)

Manufacturer code: 90162

View full details

Questions about Lee Precision Case Length Gage with shellholder 45 ACP 90162?