Lee Precision Case Length Gage with shellholder 38 Super Auto 90217
Lee Precision Case Length Gage with shellholder 38 Super Auto 90217
SKU:LEE.90217
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 38 Super Auto 90217
The Case Length Gage and Shellholder is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works for the 38 Super Auto: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the intended length. The assembly acts as a go/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance for these units of +.000/-.015 inches, reduced to +.000/-.010 inches for cartridges that headspace on the case mouth, such as the 38 Super Auto, where the length directly affects headspace and the consistency of the operating cycle. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping stage uniform. The system is entirely mechanical and requires no calibration or maintenance. Lee lists this item as 38 Super | 38 Auto: the gage covers both designations.
Main features
- Length gage and shellholder dedicated to the 38 Super Auto
- Mechanical travel stop: repeatable length across the entire batch of cases
- Lee tolerance of +.000/-.010 inches for cartridges that headspace on the mouth
- Functions as a go/no-go gage: if the case is not cut, it is already to size
- Squares the case mouth perpendicularly to the axis
- Requires no adjustments or calibration
Recommended use
The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 38 Super Auto
- Dedicated shellholder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90217
Share
