Lee Precision Case Length Gage with shellholder 375 Winchester 90165
Lee Precision Case Length Gage with shellholder 375 Winchester 90165
SKU:LEE.90165
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 375 Winchester 90165
The Case Length Gage and Shellholder is a set consisting of a length gage and a dedicated shellholder used by Lee Precision to trim cases to size and square the case mouth. This unit works for the 375 Winchester: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000/-.015 inches for these units. Trimming is performed after full-length resizing, when the case has elongated: returning it to the correct length prevents the mouth from hitting the chamber and keeps the crimp consistent. The mouth remains perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.
Main features
- Length gage and shellholder dedicated to the 375 Winchester
- Mechanical travel stop: repeatable length across the entire batch of cases
- Lee tolerance +.000/-.015 inches
- Functions as a go/no-go gauge: if the case is not cut, it is already to size
- Squares the case mouth perpendicularly to the axis
- Requires no adjustments or calibration
Recommended use
The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 375 Winchester
- Dedicated shellholder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90165
Share
