Skip to product information
1 of 1

Lee Precision Case Length Gage with shellholder 375 H&H Magnum / 375 RUM 90164

Lee Precision Case Length Gage with shellholder 375 H&H Magnum / 375 RUM 90164

Regular price €9,90 EUR
Regular price Sale price €9,90 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90164

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Case Length Gage and Shellholder 375 H&H Magnum / 375 RUM 90164

The Case Length Gage and Shellholder is the assembly consisting of the length gauge and the dedicated shellholder used by Lee Precision to trim cases to size and square their mouths. This unit works with the 375 H&H Magnum / 375 RUM: the trim length is determined by the geometry of the gauge, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.

The case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The unit acts as a go/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has lengthened: returning it to size prevents the mouth from colliding with the cartridge chamber and keeps the crimp consistent. The mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance. The same unit covers the 375 H&H Magnum and the 375 Remington Ultra Magnum, which Lee groups under the same part number.

Main features

  • Length gauge and shellholder dedicated to the 375 H&H Magnum / 375 RUM
  • Mechanical travel stop: repeatable length across the entire batch of cases
  • Lee tolerance +.000/-.015 inches
  • Works as a go/no-go gauge: if the case is not cut, it is already to size
  • Squares the case mouth perpendicular to the axis
  • Requires no adjustments or calibration

Recommended use

The gauge must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.

Package contents

  • Case Length Gage 375 H&H Magnum / 375 RUM
  • Dedicated shellholder
  • Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)

Manufacturer code: 90164

View full details

Questions about Lee Precision Case Length Gage with shellholder 375 H&H Magnum / 375 RUM 90164?