Skip to product information
1 of 1

Lee Precision Case Length Gage with shellholder 303 British 90144

Lee Precision Case Length Gage with shellholder 303 British 90144

Regular price €9,90 EUR
Regular price Sale price €9,90 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90144

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Case Length Gage and Shellholder 303 British 90144

The Case Length Gage and Shellholder is the assembly consisting of the length gage and dedicated shellholder that Lee Precision uses to trim cases to length and square the case mouth. This unit works on the 303 British: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.

The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go/no-go gage: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the case mouth from bottoming out in the cartridge chamber and keeps the crimp consistent. The mouth is perpendicular to the axis of the case, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.

Main features

  • Length gage and shellholder dedicated to the 303 British
  • Mechanical travel stop: length repeatable across the entire batch of cases
  • Lee tolerance +.000/-.015 inches
  • Functions as a go/no-go gage: if the case is not cut, it is already to size
  • Squares the case mouth perpendicular to the axis
  • Requires no adjustments or calibration

Recommended use

The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.

Package contents

  • Case Length Gage 303 British
  • Dedicated shellholder
  • Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)

Manufacturer code: 90144

View full details

Questions about Lee Precision Case Length Gage with shellholder 303 British 90144?