Lee Precision 30-06 Springfield Case Length Gage with Shellholder 90140
Lee Precision 30-06 Springfield Case Length Gage with Shellholder 90140
SKU:LEE.90140
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 30-06 Springfield 90140
The Case Length Gage and Shellholder is the assembly consisting of the length gage and the dedicated shellholder used by Lee Precision to trim cases to length and square the case mouth. This unit is designed for the 30-06 Springfield: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically once the case reaches the specified length. The unit functions as a go/no-go gauge: if the case is not trimmed, it means it is already within limits. Lee specifies a tolerance of +.000/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the mouth from bumping against the chamber and keeps crimping consistent. The case mouth results perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.
Main features
- Length gage and shellholder dedicated to the 30-06 Springfield
- Mechanical stop: repeatable length across the entire batch of cases
- Lee tolerance +.000/-.015 inches
- Functions as a go/no-go gauge: if the case is not cut, it is already to length
- Squares the case mouth perpendicularly to the axis
- Requires no adjustments or calibration
Recommended use
The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; only one is needed for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 30-06 Springfield
- Dedicated shellholder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90140
Share
