Lee Precision Case Length Gage with shellholder 243 Winchester 90119
Lee Precision Case Length Gage with shellholder 243 Winchester 90119
SKU:LEE.90119
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 243 Winchester 90119
The Case Length Gage and Shellholder is the assembly consisting of the length gage and the dedicated shellholder that Lee Precision uses to trim cases to size and square their mouths. This unit works for the 243 Winchester: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 243 Winchester is between 2.025 and 2.045 inches. The assembly acts as a go/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has lengthened: returning it to size prevents the mouth from bottoming out in the cartridge chamber and keeps the crimp consistent. The mouth remains perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.
Main features
- Length gage and shellholder dedicated to the 243 Winchester
- Trim length between 2.025 and 2.045 inches
- Mechanical travel stop: repeatable length across the entire batch of cases
- Lee tolerance +.000/-.015 inches
- Works as a go/no-go gage: if the case is not cut, it is already to size
- Squares the case mouth perpendicularly to the axis
- Requires no adjustments or calibration
Recommended use
The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—only one is needed for all cartridges with a bullet diameter of less than .475 inches—and it can be used by hand or with an electric drill. After trimming, it is recommended to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 243 Winchester
- Dedicated shellholder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90119
Share
