Lee Precision Case Length Gage with shellholder 10mm Auto 90127
Lee Precision Case Length Gage with shellholder 10mm Auto 90127
SKU:LEE.90127
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Case Length Gage and Shellholder 10mm Auto 90127
The Case Length Gage and Shellholder is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit works with the 10mm Auto: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.
The case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go/no-go gage: if the case is not cut, it means it is already within limits. Lee declares a tolerance of +.000/-.015 inches for these units, reduced to +.000/-.010 inches for cartridges that headspace on the case mouth, such as the 10mm Auto, where length directly affects headspace and the consistency of the cycling operation. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping stage uniform. The system is entirely mechanical and requires no calibration or maintenance.
Main features
- Length gage and shellholder dedicated to the 10mm Auto
- Mechanical travel stop: repeatable length across the entire batch of cases
- Lee tolerance of +.000/-.010 inches for cartridges that headspace on the mouth
- Works as a go/no-go gage: if the case is not cut, it is already at the correct length
- Squares the case mouth perpendicularly to the axis
- Requires no adjustments or calibration
Recommended use
The gage must be paired with a Lee cutting tool sold separately: Cutter and Lock Stud 90110, Cutter with Ball Grip and Lock Stud 90275, or the Deluxe Case Conditioning Combo 92160, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.
Package contents
- Case Length Gage 10mm Auto
- Dedicated shellholder
- Not included: cutting tool (Cutter and Lock Stud 90110 or equivalent)
Manufacturer code: 90127
Share
