Skip to product information
1 of 1

Lee Precision Classic Bullet Sizing Kit .430 – 90062

Lee Precision Classic Bullet Sizing Kit .430 – 90062

Regular price €38,00 EUR
Regular price Sale price €38,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90062

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Classic Bullet Sizing Kit .430

The Lee Precision Classic Bullet Sizing Kit .430 is a sizing die assembly that allows those who cast their own bullets to bring them to a final diameter of .430" and, in the same press stroke, lubricate the bullet and seat and crimp the gas check. It is the entry-level solution for bullet sizing: it screws into any standard reloading single-stage press and performs the work of a bench-mounted lube-sizer while taking up very little space on your workbench.

The die body features a standard 7/8"x14 thread, and the bullet is pushed through the calibrated hole nose-first: for this reason, the Lee system does not require top punches shaped to the ogive profile, which other sizers require you to purchase for each type of bullet. In the .430 kit, the punch is the Sizer Punch .424 (Lee code BS1345), with a diameter slightly smaller than the sizing diameter precisely because it must enter the die hole pushing the bullet from the base. The bullets that exit the die are collected in the special container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of the barrel.

Main features

  • Sizing diameter: .430"
  • Lubricates and sizes the cast bullet and, at the same time, seats and crimps the gas check
  • 7/8"x14 thread: mounts on any single-stage reloading press
  • Nose-first sizing, without top punches dedicated to the bullet profile
  • Sizing die: Bullet Sizer .430 (Lee code BS3333)
  • Matching punch: Sizer Punch .424 (Lee code BS1345)
  • Collection container for sized bullets included

Recommended use

Suitable for home-cast lead alloy bullets intended for firearms with a groove diameter corresponding to .430". It screws into any single-stage press with a 7/8"x14 mount; on Lee turret presses, it can be used after removing the indexing rod. Bullets should be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you will need to provide your own collection container.

Package contents

  • Bullet Sizer .430 (BS3333)
  • Sizer Punch .424 (BS1345)
  • Collection container for sized bullets
  • Lee instructions

Not included: reloading press and Lee Liquid Alox lubricant, sold separately.

Manufacturer code: 90062

View full details

Questions about Lee Precision Classic Bullet Sizing Kit .430 – 90062?