Lee Precision Classic Bullet Sizing Kit .429 – 90054
Lee Precision Classic Bullet Sizing Kit .429 – 90054
SKU:LEE.90054
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Classic Bullet Sizing Kit .429
The Lee Precision Classic Bullet Sizing Kit .429 is the bullet sizing assembly used by casters to size their bullets to a final diameter of .429", and in the same press stroke, lubricate the bullet and seat and crimp the gas check. It is the entry-level solution for bullet sizing: it screws into a standard reloading single-stage press and performs the work of a bench-mounted lubrisizer while taking up very little space on the workbench.
The die body features a standard 7/8"x14 thread, and the bullet is pushed through the sizing hole nose-first: for this reason, the Lee system does not require top punches shaped to the bullet profile, which other sizers force you to purchase for every type of bullet. In the .429 kit, the punch is the Sizer Punch .424 (Lee code BS1345), with a diameter slightly smaller than the sizing diameter specifically because it must enter the die hole while pushing the bullet from the base. The bullets exiting the die are collected in the special container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of the barrel.
Main features
- Sizing diameter: .429"
- Lubricates and sizes the cast bullet and, simultaneously, seats and crimps the gas check
- 7/8"x14 thread: mounts on any single-stage reloading press
- Nose-first sizing, without top punches dedicated to the bullet profile
- Sizing die: Bullet Sizer .429 (Lee code BS1328)
- Matching punch: Sizer Punch .424 (Lee code BS1345)
- Collection container for sized bullets included
Recommended use
Suitable for home-cast lead alloy bullets intended for firearms with a corresponding groove diameter of .429". It screws into any single-stage press with a 7/8"x14 mount; on Lee turret presses, it can be used after removing the indexing rod. Bullets should be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you will need to provide your own collection container.
Package contents
- Bullet Sizer .429 die (BS1328)
- Sizer Punch .424 (BS1345)
- Collection container for sized bullets
- Lee instructions
Not included: reloading press and Lee Liquid Alox lubricant, sold separately.
Manufacturer code: 90054
Share
