Lee Precision Classic Bullet Sizing Kit .410 – 90052
Lee Precision Classic Bullet Sizing Kit .410 – 90052
SKU:LEE.90052
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Classic Bullet Sizing Kit .410
The Classic Bullet Sizing Kit .410 by Lee Precision is the sizing tool used by those who cast their own bullets to bring them to a final diameter of .410" and, in the same press stroke, lubricate the bullet and seat and crimp the gas check. It is the entry-level solution for bullet sizing: it screws into any standard single-stage reloading press and performs the work of a bench-mounted lubri-sizer, taking up only a few centimeters of space on your bench.
The die body features standard 7/8"x14 threads and the bullet is pushed through the calibrated hole nose-first: for this reason, the Lee system does not require top punches shaped to the profile of the ogive, which other sizers force you to purchase for every type of bullet. In the .410 kit, the punch is the Sizer Punch .407 (Lee code BS1344), with a slightly smaller diameter than the sizing hole precisely because it must enter the die opening while pushing the bullet from the base. The bullets that exit the die are collected in the special container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of the barrel.
Main features
- Sizing diameter: .410"
- Lubricates and sizes cast bullets and, simultaneously, seats and crimps the gas check
- 7/8"x14 thread: mounts on any single-stage reloading press
- Nose-first sizing, without top punches dedicated to the bullet profile
- Sizing die: Bullet Sizer .410 (Lee code BS1326)
- Matching punch: Sizer Punch .407 (Lee code BS1344)
- Collection container for sized bullets included
Recommended use
Suitable for lead alloy bullets cast at home for use in firearms with a groove diameter corresponding to .410". Screws into any single-stage press with a 7/8"x14 mount; on Lee turret presses, it can be used after removing the indexing rod. Bullets should be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, it is necessary to provide your own collection container.
Package contents
- Bullet Sizer die .410 (BS1326)
- Sizer Punch .407 (BS1344)
- Collection container for sized bullets
- Lee instructions
Not included: reloading press and Lee Liquid Alox lubricant, sold separately.
Manufacturer code: 90052
Share
