Lee Precision .401 Classic Bullet Sizing Kit – 90060
Lee Precision .401 Classic Bullet Sizing Kit – 90060
SKU:LEE.90060
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Classic Bullet Sizing Kit .401
The Lee Precision Classic Bullet Sizing Kit .401 is a bullet sizing assembly that allows those who cast their own bullets to size them to a final diameter of .401" while simultaneously lubricating the bullet and seating and crimping the gas check in a single press stroke. It is the entry-level solution for bullet sizing: it screws into any standard reloading single-stage press and performs the work of a bench-mounted lubri-sizer while taking up very little space on your workbench.
The die body features a standard 7/8"x14 thread, and the bullet is pushed through the sizing hole nose-first; for this reason, the Lee system does not require shaped top punches tailored to the ogive profile, which other sizers require you to purchase for every bullet type. In the .401 kit, the punch is the Sizer Punch .398 (Lee code BS2919), with a diameter slightly smaller than the sizing diameter precisely because it must enter the die hole while pushing the bullet from the base. The bullets that exit the die are collected in the special container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of your barrel.
Main features
- Sizing diameter: .401"
- Lubricates and sizes cast bullets and, at the same time, seats and crimps the gas check
- 7/8"x14 thread: fits any single-stage reloading press
- Nose-first sizing, no top punches dedicated to bullet profile required
- Sizing die: Bullet Sizer .401 (Lee code BS2918)
- Matching punch: Sizer Punch .398 (Lee code BS2919)
- Collection container for sized bullets included
Recommended use
Suitable for home-cast lead alloy bullets intended for firearms with a groove diameter of .401". It screws into any single-stage press with a 7/8"x14 mount; on Lee turret presses, it can be used after removing the indexing rod. Bullets should be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you will need to provide your own collection container.
Package contents
- Bullet Sizer .401 die (BS2918)
- Sizer Punch .398 (BS2919)
- Collection container for sized bullets
- Lee instructions
Not included: reloading press and Lee Liquid Alox lubricant, sold separately.
Manufacturer code: 90060
Share
