Lee Precision Classic Bullet Sizing Kit .358 – 90048
Lee Precision Classic Bullet Sizing Kit .358 – 90048
SKU:LEE.90048
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Classic Bullet Sizing Kit .358
The Classic Bullet Sizing Kit .358 by Lee Precision is the sizing assembly used by those who cast their own bullets to bring them to a final diameter of .358", and in the same press stroke, lubricate the bullet and seat and crimp the gas check. It is the entry-level solution for bullet sizing: it screws into a standard reloading single-stage press and performs the work of a bench-mounted lubri -sizer while taking up very little space on your workbench.
The die body features standard 7/8"x14 threading, and the bullet is pushed through the calibrated hole nose-first: for this reason, the Lee system does not require top punches shaped to the bullet's ogive profile, which other sizers force you to purchase for every type of bullet. In the .358 kit, the punch is the Sizer Punch .353 (Lee code BS1342), which has a slightly smaller diameter than the sizing hole precisely because it must enter the die opening while pushing the bullet from the base. The bullets exiting the die are collected in the specific container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of the barrel.
Main features
- Sizing diameter: .358"
- Lubricates and sizes the cast bullet and, simultaneously, seats and crimps the gas check
- 7/8"x14 threading: fits any single-stage reloading press
- Nose-first sizing, without top punches dedicated to the bullet profile
- Sizing die: Bullet Sizer .358 (Lee code BS1324)
- Matching punch: Sizer Punch .353 (Lee code BS1342)
- Collection container for sized bullets included
Recommended use
Suitable for lead alloy bullets cast at home intended for firearms with a groove diameter of .358". It screws onto any single-stage press with a 7/8"x14 thread; on Lee turret presses, it can be used after removing the indexing rod. Bullets should be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you will need to provide your own collection container.
Package contents
- Bullet Sizer .358 (BS1324)
- Sizer Punch .353 (BS1342)
- Collection container for sized bullets
- Lee instructions
Not included: reloading press and Lee Liquid Alox lubricant, sold separately.
Manufacturer code: 90048
Share
