Lee Precision Classic Bullet Sizing Kit .356 – 90046
Lee Precision Classic Bullet Sizing Kit .356 – 90046
SKU:LEE.90046
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Classic Bullet Sizing Kit .356
The Classic Bullet Sizing Kit .356 by Lee Precision is a sizing assembly that allows those who cast their own bullets to size them to a final diameter of .356" while simultaneously lubricating the bullet and seating and crimping the gas check in a single press stroke. It is the entry-level solution for bullet sizing: it screws into a standard single-stage reloading press and performs the work of a bench-mounted lubri-sizer while occupying very little space on your workbench.
The die body features a standard 7/8"x14 thread, and the bullet is pushed nose-first through the sizing hole. For this reason, the Lee system does not require top punches shaped to the ogive profile, which other sizers force you to purchase for every bullet type. In the .356 kit, the punch is the Sizer Punch .353 (Lee code BS1342), which has a slightly smaller diameter than the sizing hole precisely because it must enter the die opening to push the bullet from the base. The bullets that exit the die are collected in the specific container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of the barrel.
Main features
- Sizing diameter: .356"
- Lubricates and sizes the cast bullet, while simultaneously seating and crimping the gas check
- 7/8"x14 thread: fits any single-stage reloading press
- Nose-first sizing, no top punches dedicated to the bullet profile required
- Sizing die: Bullet Sizer .356 (Lee code BS1322)
- Matched punch: Sizer Punch .353 (Lee code BS1342)
- Sized bullet collection container included
Recommended use
Suitable for home-cast lead alloy bullets intended for firearms with a groove diameter corresponding to .356". It screws into any single-stage press with a 7/8"x14 mount; on Lee turret presses, it can be used after removing the indexing rod. The bullets must be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you must provide your own collection container.
Package contents
- Bullet Sizer die .356 (BS1322)
- Sizer Punch .353 (BS1342)
- Collection container for sized bullets
- Lee instructions
Not included: reloading press and Lee Liquid Alox lubricant, sold separately.
Manufacturer code: 90046
Share
