Lee Precision Classic Bullet Sizing Kit .339 – 90576
Lee Precision Classic Bullet Sizing Kit .339 – 90576
SKU:LEE.90576
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Classic Bullet Sizing Kit .339
The Lee Precision Classic Bullet Sizing Kit .339 is a sizing unit that allows those who cast their own bullets to bring them to a final diameter of .339" and, in the same press stroke, lubricate the bullet and seat and crimp the gas check. It is an entry-level solution for bullet sizing: it screws into a standard single-stage reloading press and performs the work of a bench-mounted lubri-sizer while occupying very little bench space.
The die body features a standard 7/8"x14 thread, and the bullet is pushed through the calibrated hole nose-first: for this reason, the Lee system does not require top punches shaped to the profile of the ogive, which other sizers require you to purchase for every type of bullet. In the .339 kit, the punch is the Sizer Punch .336 (Lee code BS3068), with a slightly smaller diameter than the sizing diameter because it must enter the die hole while pushing the bullet from the base. The bullets that exit the die are collected in the specific container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of the barrel.
Main features
- Sizing diameter: .339"
- Lubricates and sizes the cast bullet and, at the same time, seats and crimps the gas check
- 7/8"x14 thread: mounts on any single-stage reloading press
- Nose-first sizing, without top punches dedicated to the bullet profile
- Sizing die: Bullet Sizer .339 (Lee code BS3086)
- Matched punch: Sizer Punch .336 (Lee code BS3068)
- Collection container for sized bullets included
Recommended use
Suitable for lead alloy bullets cast at home for firearms with a groove diameter corresponding to .339". It screws into any single-stage press with a 7/8"x14 fitting; on Lee turret presses, it can be used after removing the indexing rod. The bullets must be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you will need to provide your own collection container.
Package contents
- Bullet Sizer .339 sizing die (BS3086)
- Sizer Punch .336 (BS3068)
- Collection container for sized bullets
- Lee instructions
Not included: reloading press and Lee Liquid Alox lubricant, sold separately.
Manufacturer code: 90576
Share
