Lee Precision Classic Bullet Sizing Kit .323 – 90686
Lee Precision Classic Bullet Sizing Kit .323 – 90686
SKU:LEE.90686
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Classic Bullet Sizing Kit .323
The Lee Precision Classic Bullet Sizing Kit .323 is the sizing tool used by bullet casters to bring their cast bullets to a final diameter of .323" and, in the same press stroke, lubricate the bullet and seat and crimp the gas check. It is the entry-level solution for bullet sizing: it screws into a standard single-stage reloading press and performs the work of a bench-mounted lubri-sizer while occupying very little space on your workbench.
The die body features standard 7/8"x14 threads, and the bullet is pushed through the calibrated hole nose-first: for this reason, the Lee system does not require top punches shaped to the bullet profile, which other sizers require you to purchase for every type of bullet. In the .323 kit, the punch is the Sizer Punch .321 (Lee code BS1980), with a slightly smaller diameter than the sizing diameter precisely because it must enter the die hole to push the bullet from the base. Bullets exiting the die are collected in the specific container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of your barrel.
Main features
- Sizing diameter: .323"
- Lubricates and sizes cast bullets and, simultaneously, seats and crimps the gas check
- 7/8"x14 thread: mounts on any single-stage reloading press
- Nose-first sizing, no top punches dedicated to the bullet profile required
- Sizing die: Bullet Sizer .323 (Lee code BS1973)
- Matched punch: Sizer Punch .321 (Lee code BS1980)
- Collection container for sized bullets included
Recommended use
Suitable for home-cast lead alloy bullets intended for firearms with a corresponding .323" groove diameter. It screws into any single-stage press with a 7/8"x14 mount; on Lee turret presses, it can be used after removing the indexing rod. Bullets must be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you will need to provide your own collection container.
Package contents
- Bullet Sizer die .323 (BS1973)
- Sizer Punch .321 (BS1980)
- Collection container for sized bullets
- Lee instructions
Not included: reloading press and Lee Liquid Alox lubricant, sold separately.
Manufacturer code: 90686
Share
