Skip to product information
1 of 1

Lee Precision Classic Bullet Sizing Kit .308 – 90037

Lee Precision Classic Bullet Sizing Kit .308 – 90037

Regular price €39,00 EUR
Regular price Sale price €39,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90037

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Classic Bullet Sizing Kit .308

The Classic Bullet Sizing Kit .308 by Lee Precision is the sizing die assembly used by bullet casters to bring their cast bullets to a final diameter of .308" while simultaneously lubricating the bullet and seating and crimping the gas check in a single press stroke. It is the entry-level solution for bullet sizing: it screws into any standard reloading single-stage press and performs the work of a bench-mounted lubri-sizer while occupying only a few centimeters of space on your workbench.

The die body features a standard 7/8"x14 thread, and the bullet is pushed through the calibrated hole nose-first: for this reason, the Lee system does not require shaped top punches matched to the bullet's ogive, which other sizers force you to purchase for every bullet type. In the .308 kit, the punch is the Sizer Punch .305 (Lee code BS1338), which has a slightly smaller diameter than the sizing diameter precisely because it must enter the die hole while pushing the bullet from the base. The bullets that exit the die are collected in the special container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of the barrel.

Main features

  • Sizing diameter: .308"
  • Lubricates and sizes the cast bullet while simultaneously seating and crimping the gas check
  • 7/8"x14 thread: fits any single-stage reloading press
  • Nose-first sizing, no bullet-specific top punches required
  • Sizing die: Bullet Sizer .308 (Lee code BS1315)
  • Matched punch: Sizer Punch .305 (Lee code BS1338)
  • Collection container for sized bullets included

Recommended use

Suitable for home-cast lead alloy bullets intended for firearms with a groove diameter corresponding to .308". It screws into any single-stage press with a 7/8"x14 mount; on Lee turret presses, it can be used after removing the indexing rod. Bullets should be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you will need to provide your own collection container.

Package contents

  • Bullet Sizer .308 die (BS1315)
  • Sizer Punch .305 (BS1338)
  • Collection container for sized bullets
  • Lee instructions

Not included: reloading press and Lee Liquid Alox lubricant, sold separately.

Manufacturer code: 90037

View full details

Questions about Lee Precision Classic Bullet Sizing Kit .308 – 90037?