Lee Precision Classic Bullet Sizing Kit .224 – 90049
Lee Precision Classic Bullet Sizing Kit .224 – 90049
SKU:LEE.90049
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Classic Bullet Sizing Kit .224
The Lee Precision Classic Bullet Sizing Kit .224 is the sizing assembly that allows those who cast their own bullets to bring them to a final diameter of .224" while simultaneously lubricating the bullet and seating and crimping the gas check in a single press stroke. It is the entry-level solution for bullet sizing: it screws into a standard single-stage reloading press and performs the work of a bench-mounted lubri-sizer, taking up only a few centimeters of workspace.
The die body features a standard 7/8"x14 thread, and the bullet is pushed through the calibrated hole nose-first: for this reason, the Lee system does not require shaped top punches matching the ogive profile, which other sizers require you to purchase for every bullet type. In the .224 kit, the punch is the Sizer Punch .219 (Lee code BS3371), which has a slightly smaller diameter than the sizing diameter precisely because it must enter the die hole while pushing the bullet from the base. The bullets exiting the die are collected in the specific container provided with the kit. As a general rule, Lee recommends choosing a sizing diameter approximately .001" larger than the groove diameter of the barrel.
Main features
- Sizing diameter: .224"
- Lubricates and sizes cast bullets and, at the same time, seats and crimps the gas check
- 7/8"x14 thread: mounts on any single-stage reloading press
- Nose-first sizing, without top punches dedicated to the bullet profile
- Sizing die: Bullet Sizer .224 (Lee code BS3366)
- Matching punch: Sizer Punch .219 (Lee code BS3371)
- Collection container for sized bullets included
Recommended use
Suitable for home-cast lead alloy bullets intended for firearms with a groove diameter corresponding to .224". It screws onto any single-stage press with a 7/8"x14 mount; on Lee turret presses, it can be used after removing the indexing rod. Bullets must be treated with Lee Liquid Alox before sizing. If the kit is used on an APP or Deluxe APP press, you must provide your own collection container.
Package contents
- Bullet Sizer .224 die (BS3366)
- Sizer Punch .219 (BS3371)
- Collection container for sized bullets
- Lee instructions
Not included: reloading press and Lee Liquid Alox lubricant, sold separately.
Manufacturer code: 90049
Share
