Lee Precision 38-55 Winchester Factory Crimp Die
Lee Precision 38-55 Winchester Factory Crimp Die
SKU:LEE.90853
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Factory Crimp Die 38-55 Winchester
The Lee Precision Factory Crimp Die in 38-55 Winchester caliber is a die dedicated solely to crimping the round, to be mounted as a separate station after the seating die. Separating bullet seating from crimping allows the two operations to be adjusted independently and is the standard choice for those reloading rifle cartridges for hunting and shooting, where the round must withstand recoil, the feeding cycle from the magazine, and handling.
The die works with a collet system: steel segments close radially on the case neck and secure the round to the bullet with pressure distributed across the entire circumference. Since the crimp is created by the closing of the collet and not by contact between the case mouth and the die opening, the result remains repeatable even when cases are not all the same length, unlike the roll crimp obtained with a seating die. Lee states that a firm crimp raises the bullet's starting pressure, makes the pressure curve more uniform, and reduces velocity dispersion, and that the system works even with bullets lacking a cannelure.
Main features
- Collet-style crimp-only die for rifle cartridges
- Caliber: 38-55 Winchester, also known as 38-55 WCF
- Uniform crimp across the entire circumference of the neck
- Repeatable results even with cases of uneven length
- Effective even with bullets without a cannelure or crimp groove
- 7/8"-14 threaded body, standard for reloading presses
- Crimp intensity adjustable by screwing in the die body
Recommended use
It screws into any reloading press with a standard 7/8"-14 thread, including Lee single-stage, turret, and progressive presses. It should be used as a standalone station after adjusting the seating die so that it does not crimp: the bullet is first seated to the desired depth and then crimped in a dedicated step.
Package contents
The package contains the Factory Crimp Die complete with a Spline Drive lock ring and user instructions. Shell holder, resizing die, and seating die are not included, as they are part of Lee die sets or must be purchased separately.
Manufacturer code: 90853
Share
