Lee Precision Factory Crimp Die 38-40 Winchester
Lee Precision Factory Crimp Die 38-40 Winchester
SKU:LEE.90852
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Factory Crimp Die 38-40 Winchester
The Lee Precision Factory Crimp Die in 38-40 Winchester caliber is a die dedicated exclusively to crimping the round, to be mounted as a separate station after the seating die. Separating bullet seating from crimping allows for independent adjustment of the two operations and is the standard choice for those reloading rifle cartridges for hunting and target shooting, where the round must withstand recoil, magazine feeding cycles, and handling.
The die works with a collet system: steel segments close radially around the case neck, tightening the round onto the bullet with pressure distributed across the entire circumference. Because the crimp is created by the collet closure rather than contact between the case mouth and the die throat, the result remains consistent even when cases are not all the same length, unlike the roll crimp achieved with the seating die. Lee states that a firm crimp increases initial bullet pressure, makes the pressure curve more uniform, and reduces velocity spread, and that the system even works with bullets lacking a cannelure.
Main features
- Collet-style crimp-only die for rifle cartridges
- Caliber: 38-40 Winchester, also known as 38-40 WCF
- Uniform crimping around the entire circumference of the neck
- Repeatable results even with cases of non-uniform length
- Effective even with bullets without a cannelure or crimp groove
- 7/8"-14 threaded body, standard for reloading presses
- Crimp intensity adjustable by screwing the die body in or out
Recommended use
It screws into any reloading press with standard 7/8"-14 threading, including Lee single-stage, turret, and progressive presses. It should be used as a standalone station after adjusting the seating die so that it does not crimp: the bullet is first seated to the desired depth and then crimped in a dedicated step.
Package contents
The package contains the Factory Crimp Die complete with a Spline Drive lock ring and user instructions. Shell holders, resizing dies, and seating dies are not included, as they are part of Lee die sets or must be purchased separately.
Manufacturer code: 90852
Share
