Skip to product information
1 of 1

Lee Precision 308 Winchester Factory Crimp Die

Lee Precision 308 Winchester Factory Crimp Die

Regular price €21,00 EUR
Regular price Sale price €21,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90823

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Factory Crimp Die 308 Winchester

The Lee Precision Factory Crimp Die in 308 Winchester caliber is a die dedicated solely to crimping the round, designed to be mounted as a separate station after the seating die. Separating bullet seating from crimping allows for independent adjustment of both operations and is the preferred choice for those reloading rifle cartridges for hunting and target shooting, where the round must withstand recoil, the feeding cycle from the magazine, and handling.

The die utilizes a collet system: steel segments close radially on the case neck and secure the round to the bullet with pressure distributed around the entire circumference. Because the crimp is created by the closing of the collet rather than by contact between the case mouth and the die throat, the result remains consistent even when cases are not all the same length, unlike the roll crimp obtained with the seating die. Lee states that a firm crimp increases the bullet starting pressure, makes the pressure curve more uniform, and reduces velocity spread, and that the system works even with bullets lacking a cannelure. Lee also indicates this same die is suitable for the 303 Savage.

Main features

  • Collet-style crimping die for rifle cartridges
  • Caliber: 308 Winchester (7.62 NATO)
  • Uniform crimp around the entire circumference of the neck
  • Consistent results even with cases of varying lengths
  • Effective even with bullets without a cannelure or crimp groove
  • 7/8"-14 threaded body, standard for reloading presses
  • Crimp intensity adjustable by screwing the die body

Recommended use

It screws into any reloading press with a standard 7/8"-14 thread, including Lee single-stage, turret, and progressive presses. It should be used as a standalone station, after adjusting the seating die so that it does not crimp: the bullet is first seated to the desired depth and then crimped in a dedicated pass.

Package contents

The package contains the Factory Crimp Die complete with a Spline Drive lock ring and user instructions. It does not include a shell holder, resizing die, or seating die, which are part of Lee die sets or must be purchased separately.

Manufacturer code: 90823

View full details

Questions about Lee Precision 308 Winchester Factory Crimp Die?