The Lee Precision Factory Crimp Die in 303 British caliber is a die dedicated solely to crimping the round, designed to be mounted as a separate station after the seating die. Separating bullet seating from crimping allows for independent adjustment of both operations and is the standard choice for those reloading rifle cartridges for hunting and target shooting, where the round must withstand recoil, magazine feeding cycles, and handling.
The die works with a collet system: steel segments close radially on the case neck and tighten the case onto the bullet with pressure distributed across the entire circumference. Because the crimp is created by the closing of the collet rather than by contact between the case mouth and the die opening, the result remains repeatable even when cases are not all of uniform length, unlike the roll crimp produced by a seating die. Lee states that a firm crimp increases the bullet's start pressure, makes the pressure curve more uniform, reduces velocity spread, and that the system works even with bullets lacking a cannelure.
Main features
Collet-style crimp-only die for rifle cartridges
Caliber: 303 British
Uniform crimping across the entire circumference of the neck
Repeatable results even with cases of non-uniform length
Effective even with bullets without a cannelure or crimp groove
7/8"-14 threaded body, standard for reloading presses
Crimp intensity adjustable by screwing the die body in or out
Recommended use
It screws into any reloading press with standard 7/8"-14 threading, including Lee single-stage, turret, and progressive presses. It should be used as a standalone station after adjusting the seating die so that it does not crimp: the bullet is first seated to the desired depth and then crimped in a dedicated step.
Package contents
The package contains the Factory Crimp Die complete with a Spline Drive lock ring and user instructions. It does not include a shell holder, resizing die, or seating die, which are part of Lee die sets or must be purchased separately.