Lee Precision 300 AAC Blackout Factory Crimp Die
Lee Precision 300 AAC Blackout Factory Crimp Die
SKU:LEE.90590
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Factory Crimp Die 300 AAC Blackout
The Lee Precision Factory Crimp Die in 300 AAC Blackout is a die dedicated solely to crimping, designed to be mounted as a separate station after the seating die. Separating bullet seating from crimping allows for independent adjustment of both operations and is the standard choice for those reloading rifle cartridges for hunting and target shooting, where the round must withstand recoil, the feeding cycle from the magazine, and handling.
The die utilizes a collet system: steel segments close radially on the case neck, securing the round to the bullet with pressure distributed across the entire circumference. Because the crimp is created by the closing of the collet rather than by contact between the case mouth and the die opening, the result remains repeatable even when cases are not of identical length, unlike the roll crimp achieved with a seating die. Lee states that a firm crimp increases the initial bullet start pressure, creates a more uniform pressure curve, and reduces velocity deviation, and that the system works even with bullets lacking a cannelure.
Main features
- Collet-style crimp-only die for rifle cartridges
- Caliber: 300 AAC Blackout
- Uniform crimping around the entire circumference of the neck
- Repeatable results even with cases of inconsistent length
- Effective even with bullets without a cannelure or crimping groove
- 7/8"-14 threaded body, standard for reloading presses
- Crimp intensity adjustable by screwing the die body in or out
Recommended use
It screws into any reloading press with standard 7/8"-14 threading, including Lee single-stage, turret, and progressive presses. It should be used as a standalone station after adjusting the seating die so that it does not crimp: the bullet is first seated to the desired depth and then crimped in a dedicated pass.
Package contents
The package contains the Factory Crimp Die complete with a Spline Drive lock nut and operating instructions. The shell holder, resizing die, and seating die are not included, as they are part of Lee die sets or must be purchased separately.
Manufacturer code: 90590
Share
