Skip to product information
1 of 1

Lee Precision 30-06 Springfield Factory Crimp Die

Lee Precision 30-06 Springfield Factory Crimp Die

Regular price €21,00 EUR
Regular price Sale price €21,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90824

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Factory Crimp Die 30-06 Springfield

The Lee Precision Factory Crimp Die in 30-06 Springfield caliber is a die dedicated exclusively to crimping, designed to be mounted as a separate station after the seating die. Separating bullet seating from crimping allows for independent adjustment of both operations and is the standard choice for those reloading rifle cartridges for hunting and target shooting, where the round must withstand recoil, magazine feeding cycles, and handling.

The die operates using a collet system: steel sectors close radially on the case neck and secure the bullet with pressure distributed across the entire circumference. Since the crimp is created by the closing of the collet rather than contact between the case mouth and the die entrance, the result remains consistent even when cases are not all the same length, unlike the roll crimp obtained with a seating die. Lee states that a firm crimp increases the bullet's start pressure, results in a more uniform pressure curve and reduced velocity spread, and that the system works even with bullets lacking a cannelure.

Main features

  • Collet-style crimp-only die for rifle cartridges
  • Caliber: 30-06 Springfield
  • Uniform crimping around the entire circumference of the neck
  • Consistent results even with cases of non-uniform length
  • Effective even with bullets without a cannelure or crimp groove
  • 7/8"-14 threaded body, standard for reloading presses
  • Crimping intensity adjustable by screwing in the die body

Recommended use

It screws into any reloading press with a standard 7/8"-14 thread, including Lee single-stage, turret, and progressive presses. It should be used as a separate station, after adjusting the seating die so that it does not crimp: the bullet is first seated to the desired depth and then crimped in a dedicated pass.

Package contents

The package contains the Factory Crimp Die complete with a Spline Drive locking ring and operating instructions. It does not include a shell holder, resizing die, or seating die, which are part of Lee die sets or must be purchased separately.

Manufacturer code: 90824

View full details

Questions about Lee Precision 30-06 Springfield Factory Crimp Die?