Skip to product information
1 of 1

Lee Precision 270 Winchester Factory Crimp Die

Lee Precision 270 Winchester Factory Crimp Die

Regular price €21,00 EUR
Regular price Sale price €21,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90820

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Factory Crimp Die 270 Winchester

The Lee Precision Factory Crimp Die in .270 Winchester caliber is a die dedicated solely to crimping the round, designed to be mounted as a separate station after the seating die. Separating the bullet seating from the crimping allows both operations to be adjusted independently and is the standard choice for those who reload rifle cartridges for hunting and target shooting, where the round must withstand recoil, the feeding cycle from the magazine, and handling.

The die works with a collet system: steel segments close radially on the case neck and secure the bullet with pressure distributed around the entire circumference. Because the crimp is created by the closing of the collet rather than contact between the mouth of the case and the die mouth, the result remains repeatable even when cases are not all the same length, unlike the roll crimp obtained with a seating die. Lee states that a firm crimp raises the bullet starting pressure, makes the pressure curve more uniform, and reduces velocity dispersion, and that the system also works with bullets lacking a cannelure.

Main features

  • Collet-style crimping-only die for rifle cartridges
  • Caliber: 270 Winchester
  • Uniform crimping around the entire circumference of the neck
  • Repeatable results even with cases of non-uniform length
  • Effective even with bullets without a cannelure or crimping groove
  • 7/8"-14 threaded body, standard for reloading presses
  • Crimping intensity adjustable by screwing the die body

Recommended use

It screws onto any reloading press with standard 7/8"-14 threading, including Lee single-stage, turret, and progressive presses. It should be used as a standalone station, after adjusting the seating die so that it does not crimp: the bullet is first seated to the desired depth and then crimped in a dedicated pass.

Package contents

The package contains the Factory Crimp Die complete with a Spline Drive locking ring and instructions for use. The shell holder, resizing die, and seating die are not included, as they are part of Lee die sets or must be purchased separately.

Manufacturer code: 90820

View full details

Questions about Lee Precision 270 Winchester Factory Crimp Die?